NCMX-303K busbar processing machine

1, bending, punching, shearing integration 2, no need repair 3, high efficiency 4, CE and ISO9001:2008

Instruction:

busbar machine is also called busbar processing machine, copper processing machine, aluminum processing machine, busbar bending cutting punching shearing machine, copper busbar machine, aluminum busbar machine, which is mainly used in electric industry.

NCMX Busbar Machine including:

 NCMX-303K, NCMX-503K and NCMX-302K

This kind machine is mainly used for different types of processing of copper or aluminum busbar. One machine can carry out processing of punching, shearing and bending at the same time or respectively. It is easy to operate, convenient to use and high production efficiency. So it is an ideal processing equipment for electrical appliance manufacture of high and low voltage.

Characteristics:

1) This machine has 3 units for punching, shearing and bending and can do special processing work such as pressing, embossing, pressing cable joint, twisting and so on.

2) It is convenient for using and higher production efficiency than traditional busbar processing equipments.

3) You can adjust working stroke of each unit conveniently to reduce machining auxiliary time and improve production efficiency.

4) We adopt vertical machining method for punching and shearing unit, so operation is flexible and convenient. We use flatedge shearing method, so the work piece surface is neater and smoother

5) Adopting horizontal bending type to achieve flat bending and vertical bending by changing tools.

6) Through changing tools, this machine can achieve many functions like embossing, pressing, pressing cable joint, twisting and so on.

7) There are 4 trundles. So the machine can be moved conveniently by adjusting them. 

Technical parameters

		NCMX—303K	NCMX-503K	NCMX—302K
Punching	Max power (KN)	300	500	300
	Punching Diameter (mm)	4.3~25	4.3~34	4.3~25
	Max thickness (mm)	12	16	12
	Max width (mm)	150	250	150
Shearing	Max thickness (mm)	12	16	12
	Max width (mm)	150	250	150
Bending	Max power (KN)	300	500	300
	Max width (mm)	150	250	150
	Max thickness (mm)	12	16	12
Vertical Bending	Max width (mm)	100 (10mm thick copper)	100 (10mm thick copper)	100 (10mm thick copper)
	Min bending degree	90°	90°	90°
Embossing		√	√	√
Pressing Cable Joint		√	√	√
Twisting		√	√	√
Outline Dimensions		1300×1000×900	1500×1345×900	1700×2200×1550
Power of Main Motor (KW)		3×4	3×5.5	4KW×2

Accessories with machine

4 sets of punching, 1 set of shearing, 1 set of flat bending, 1 set of vertical bending.

NCMX-303K introduction

This is a special equipment for busbar processing of copper or aluminum in electric industry, high and low voltage workpiece and busbar groove industry. It has multifunction such as punching holes, shearing, bending, vertical bending, embossing, twisting, pressing cable joint on busbar. It is high precision and good consistency. The machine is controlled by single axis which controls the angle of bending. The precision of angle is improved obviously! We use electrical non-identation die to guarantee bending precision and no bending mark. Control accuracy of bending angle: ±1º

NCMX-303K busbar processing machine